Innokin iTaste MVP 3.0 Pro - Full Kit - 4500mah
The iTaste MVP 3.0 Pro is the newest in the line of internationally bestselling iTaste MVP vaporizers. The iTaste MVP 3.0 features a greater range of Variable Voltage, Variable Wattage, advanced safety features, portable electronics charging capacity and also ‘Vape while charging’ Technology.
The iTaste MVP 3 Pro has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, an included ego adaptor and a replaceable integrated micro-USB charging cable. With 4500mah of battery capacity you will be vaping for days between recharging and the MVP 3 PRO will continue to function as a portable mobile and electronics charger with an integrated Micro USB cable! When you need real power your MVP 3 PRO will be there for you. The MVP 3 PRO vapes perfectly with the iSub to give you precise control for perfect flavors and unbelievably huge clouds.
The iTaste MVP 3 Pro battery has a variable voltage range of 3.0 – 9.0 volts adjustable in 0.1 volt increments and a variable wattage range of 6.0 – 60.0 Watts, adjustable in 0.5 watts increments.
The iTaste MVP 3 uses vRMS DC current and is very accurate with a power deviation of 0.1 Watt. The full 60Watts is precisely maintained between resistances of 0.2 to 3.1 ohms. There is no wasted power and exact accuracy means you are always vaping the power level that you choose. vRMS provides superior precision in delivering the exact wattage Ohm’s Law requires and stable power means better vapor.
On eLiquid: We strongly suggest 12mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers.
MVP 3.0 Pro Starter Kit Includes:
1 x Innokin iTaste MVP 3.0 Pro
1 x iSub G Tank w/ coil
1 x USB charger cable
1 x eGo Threading Adapter
1 x English manual
1 x Acrylic box
Features of The iTaste MVP 3.0 Pro:
Battery Level Indicator: The iTaste MVP 3.0 Pro battery has a tri-color LED on the top.
- Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off.
- Yellow = Half Power.
- Red = Low Power. Charge the MVP3.0.
Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments.
Wattage can be adjusted from 6.0 – 60.0 Watts in .5 watts increments.
Low Voltage Warning:
The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste MVP 3 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.
The iTaste MVP 3.0 Pro features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on.
‘Vape while charging’ Technology
The iTaste MVP 3 is recharged with a Micro USB cable. When plugged into a power source the iTaste MVP3.0 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology.
Remembers last Voltage or Wattage setting:
When the iTaste MVP 3 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP 3.0 is powered on.
Portable power source for electronic products:
To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP 3.0. The included iTaste MVP 3.0 Pro starter kit charging cable can also be used. Plug the larger USB port into the MVP 3 and the Micro-USB into the electronic device and power on the iTaste MVP 3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.
High compatibility 510 connector:
The iTaste MVP 510 threading is compatible with all standard 510 clearomizers & atomizers.
Operating Voltage: 3.0V-9V
Operating Wattage: 6.0W-60W
Battery : 3.7V 4500mAH （16.65WH）
Atomizer Resistance: 0.2 Ohm (minimum)
Standby current: 200uA max
Maximum output Wattage: 60W
Maximum output Current: 17.5A
Maximum output Voltage: 9V
Charging: Micro USB DC5V/1A
OUTPUT Port : DC5V/1A
- Click Here to view a PDF version of our iTaste MVP 3.0 Pro user manual.
Video Review by IndoorSmoker