ELeaf Lemo 2 RTA Kit
The Lemo 2 is the latest version in the popular Lemo series of atomizers from ELeaf. Lemo 2 features a rebuildable tank atomizer (RTA) made from stainless steel with a glass tank, and requires the user to build their own coil systems. Due to its new innovative design of a side e-liquid fill hole the fill process also becomes easier and leakage can be avoided. It even has an upgraded airflow system with two large cyclops style airholes making it very easy to adjust airflow to produce clouds to your personal preference.
The Lemo 2 uses a special kind of polymer insulating material called PEEK which is famous for high heat and corrosion resistance. PEEK is used as an insulator inside the atomizer head to provide a clean taste throughout your use of the Lemo 2.
The Lemo 2 comes with a pre-built 0.5ohm coil and a large wide bore drip tip.
Important Note: Due to the nature of this product there is no warranty. This product is for advanced users and requires technical knowledge in order to properly use it.
Rebuildable Atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is pre-installed with one coil but assembly and unstallation is required for rebuilding more. Extra wick, wire and mesh sold separately.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use one. Rebuildable atomizer coils and wicks have known risks. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
- A rebuildable coil/wick MUST be tested carefully with a multimeter before it is used.
- If it is not tested it is entirely the risk of the user.
- Faulty wicks/coils will damage electronic devices like batteries.
- New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
- No new coil/wick assembly should be used on an electronic device until known to be safe.
- These items destroy electronic devices if faulty. This is a known issue.
- Search YouTube/Google for assistance before attempting a build.
Filling the Lemo 2 with eLiquid:
- Close the airflow control valve prior to opening the side eLiquid fill hole.
- Rotate the side e-liquid fill hole cover counter-clockwise to expose the fill hole and then slowly refill the e-liquid into the glass tube. Fill the Lemo no more than 80-90% leaving an air bubble at the top to avoid leakage. Do not extend the eLiquid bottles nozzle forcing liquid into the Lemo too fast or you could also experience leakage.
- After the liquid is filled, rotate the side e-liquid fill hole cover clockwise to close the fill hole.
Lemo 2 Kit Includes:
1x Lemo 2 Wide Bore Mouthpiece
1x Lemo 2 Top Cap
1x Lemo 2 Glass Tube
1x Lemo 2 Atomizer Cover
1x Lemo 2 Atomizer Tube
1x Lemo 2 Coil Stand
1x Lemo 2 Atomizer Base
1x Pre-made Heating coil (0.5 ohm)
1x Heating Coil (1 m)
4x Small Screws
4x Seals Gasket (big)
2x Seals Gasket (mid)
5x Silicone (black)
2x Organic Cotton
1x Mini Screw Driver